Output trays
Guide to Performing Routine Maintenance
2-3
Unloading the
stitcher/stacker
tray
To unload the stitcher/stacker tray:
1. Lift the black handle on the outside of the tray.
1. Tray handle
2. Stacker arms
2. Carefully slide the tray up and out and remove the printed
pages.
NOTE: A false tray full condition may occur when you
remove small stapled sets without pulling the tray out. The
counter is not reset, causing the printer to stop before the tray
is actually full.
3. Close the tray by sliding it back under the stacker arms.
NOTE: Your service representative can adjust your printer so
that printing continues automatically when the stitcher/stacker
tray is unloaded and replaced.
2
1
Содержание 4050
Страница 12: ...Safety xii Guide to Performing Routine Maintenance...
Страница 40: ...Fuser lubricant and pressure roll wiper 4 12 Guide to Performing Routine Maintenance...
Страница 46: ...Inks 5 6 Guide to Performing Routine Maintenance...
Страница 52: ...Maintenance and support services 7 4 Guide to Performing Routine Maintenance...