Xerox 2101, Руководство по настройке

Страница: 78 / 192

4
4-22 Performing Setup from the Control Panel
LPD Setup options
PServer Setup options
Network Setup
Service Setup
LPD Setup
Enable LPD
Yes/No [Yes]
Select Yes to allow lpd printing. For more information, see “Setting up the
Fiery EX2101 on TCP/IP networks” on page 2-17.
Network Setup
Service Setup
PServer Setup
Enable PServer
Yes/No [No]
Select Yes if you have a Novell network connected to the Fiery EX2101.
Choose NDS Setup if your network uses NetWare in native mode. Choose Bindery
Setup if your network uses NetWare in bindery emulation mode.
If your network uses both NDS and Bindery, set up NDS first. If you set up NDS
after Bindery, you will overwrite Bindery Setup.
If your network uses both NDS and Bindery, and uses NetWare servers in bindery
emulation, note that the Fiery EX2101 cannot service NDS and bindery emulation
servers on the same NDS tree.
Exit PServer Setup
NDS Setup
Bindery Setup
Polling Interval
PServer Setup