Xerox 2101, Руководство по настройке

Страница: 67 / 192

4
4-11 Server Setup options
N
OTE
:
If you make a mistake during Setup, use the Menu button to cancel without
saving changes. Pressing the Menu button cancels what you are doing in the current
screen to bring you to the next higher-level menu. You may have to press Menu more
than once to return to the top level for the particular Setup in which you are working.
Once at the top level, you can enter a Setup menu again, or exit without making
changes.
When you have entered the settings, you must save the changes. You are usually
prompted to do so. If you choose Yes, your settings overwrite previous settings. If you
choose No, your previous settings are retained. If necessary, the Fiery EX2101 restarts
after you exit from the Setup menu.
Server Setup options
The Server Setup menu allows you to specify system information that pertains to the
Fiery EX2101 and all users. To access the menu, follow the instructions on
page 4-8 .
When you choose Server Setup, the options appear in sequence, as follows. Default
values, where applicable, appear in square brackets. Words shown in italics indicate
that a product- or site-specific value is displayed.
Server Name
Default server name
Enter a name for the Fiery EX2101 (up to 15 characters long). This name appears in
the Chooser on an AppleTalk network.
N
OTE
:
Do not use the device name (
EX2101
) as the server name. Also, if you have more
than one Fiery EX2101, do not give them the same name.
System Date
Enter the correct system date in the standard form for your use. The date appears on
the Job Log.
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
Press button for Server Setup