Xerox 2101, Руководство по настройке

Страница: 100 / 192

4
4-44 Performing Setup from the Control Panel
Paper Size
8.5x11P/A6/A5/A4/A3/11x17/12x18/DocuPac/Legal_13/Postcard, SR-A3
[8.5x11P (in the United States, A4 elsewhere)]
Select a paper size which is used as a default for PCL printing. This option sets the size
of the print area on the paper, not the size of the paper itself.
Default Orientation
Portrait/Landscape [Portrait]
Select whether a document to be printed is oriented along the short edge of the paper
(portrait) or along the long edge of the paper (landscape).
Form Length (lines)
5-128 [60]
Specify the number of lines to be printed per page.
Font Size (pt)
[12.00]
When the number selected in Font Number represents a proportionally spaced scalable
font, the Font Size option appears. Specify the point size (height) of the default font.
Font Pitch (char/in)
[10.00]
When the number selected in Font Number represents a fixed pitch scalable font, the
Font Pitch option appears. Specify the width of scalable type. Pitch is measured by
characters per inch, so 10-pitch type fits ten characters per inch.
Symbol Set
ASCII/ROMAN-8/ECMA-94 L1/PC-8... [ROMAN-8]
Select the symbol set that best matches the needs of users printing to the
Fiery EX2101.
Font Source
INTERNAL/SOFTFONT [INTERNAL]
Specify the font source to be enabled.