Xeos Alert Geomatics Resolute, Руководство пользователя

Страница: 49 / 65

Resolute User Manual Version 2.5 44
Appendix A: Command Index
Command Variables Description Sample
$resetnow
N/A Resets the unit $resetnow
$schedule
N/A Returns schedule of all
enabled peripherals $schedule
$ver
N/A Returns the firmware
version loaded $ver
$getserialnumber
N/A Returns the device serial
nubmer $getserialnumber
$GnssSet5vAnt T,F T (true) sets the antenna
voltage to 5V, F(false) the
default, sets the antenna
voltage to 3.3V $GnssSet5vAnt T
$Gnssget5vAnt N/A Returns the antenna
voltage $Gnssget5vAnt
$gnsssetenabled T,F T (true) enables the
GNSS, F (false) disables
the GNSS $gnsssetenabled t
$gnssgetenabled N/A Returns the enabled state
of the GNSS $gnssgetenabled
$gnsssetduration s,m,h,d Set the duration of the
GNSS receiver (0 for
always on) $gnsssetduration 1h
$gnssgetduration N/A Returns the duration of
the GNSS receiver $gnssgetduration
$gnsssetinterval s,m,h,d Set the interval of the
GNSS receiver $gnsssetinterval 1d
$gnssgetinterval N/A Returns the interval of
the GNSS receiver $gnssgetinterval
$gnsssetoffset s,m,h,d Set the interval of the
GNSS receiver $gnsssetoffset 12h
$gnssgetoffset N/A Returns the offset of the
GNSS receiver $gnssgetoffset
$gnsssetusegnsstime T,F T (true) enables GNSS
time (no leap seconds), F
(false) disabled $gnsssetusegnsstime t
$gnssgetusegnsstime N/A Returns if GNSS time is
enabled $gnssgetusegnsstime
$tunnelsetenabled
T,F T (true) enables the
tunnel, F (false) disables $tunnelsetenabled t