Xenteq PurePower PPI 1000-212, Руководство пользователя

Страница: 11 / 34

11
E N
N L
I N T R O D U C T I O N
Read this user manual completely before using the device. In the appendices you
will find the technical specifications of the PurePower inverters.
This DC-AC inverter converts a 12 or a 24 Volts DC voltage into a AC voltage with
a pure sine wave (230VAC). With this device it is possible, with use of the right
battery, to supply equipment that normally requires a mains supply.
Important
Always check the actual power rating of the equipment (power consumption). In
addition, bear in mind the surge powers. These (start-up) peaks can be as much
as 5-7 times the continuous power consumption. Check whether these values
are within the capacity limits of the inverter. Equipment with high surge power
are for example: air conditioning, vacuum cleaner, tools and pumps. If you want
to use multiple equipment at the same time, then add up the power
consumptions.
For the models from 600Watt a remote control is available as an optional, see
page 16.
I N S T A L L A T I O N
Mounting
The inverter must be mounted in a space that complies with the following:
-
Mount the inverter in a dry place where there is no chance of it being affected
by moisture or dirt. Also be aware of moisture or dirt that can be sucked in by
the fan.
-
Leave enough space on all sides of the inverter (min. 10cm) for air circulation.
Make sure that there are ventilation vents.
-
The ambient temperature must be between 0ºC and 40ºC. Ideal is between 15ºC
and 25ºC.
-
Keep the inverter out of the reach of children.
- A working inverter produces a dangerous voltage.
-
Do not use the inverter in places where gases are released or flammable
materials are stored.
-
The distance between inverter and battery should be as short as possible, but
place the inverter in a separate room.
-
Place the inverter on a stable underground and prevent (heavy) vibrations and
shocks.