manualshive.com logo in svg

Xenon 1900, Руководство пользователя, Страница: 68 / 356

Поделиться
Скачать
Xenon 1900 Скачать руководство пользователя страница 68

2 - 20

Caps Lock

 

is used when you normally have the Caps Lock key on.

Shift Lock

 

is used when you normally have the Shift Lock key on (not common 

to U.S. keyboards).

Automatic Caps Lock 

is used if you change the Caps Lock key on and off.   

The software tracks and reflects if you have Caps Lock on or off . This selection 
can only be used with systems that have an LED that notes the Caps Lock sta-
tus (AT keyboards).

Autocaps via NumLock

 

bar code should be scanned in countries (e.g., Ger-

many, France) where the Caps Lock key cannot be used to toggle Caps Lock.  
The NumLock option works similarly to the regular Autocaps, but uses the Num-
Lock key to retrieve the current state of the Caps Lock.

Emulate External Keyboard 

should be scanned if you do not have an external 

keyboard (IBM AT or equivalent).  

Note: After scanning the Emulate External Keyboard bar code, you must power 

cycle your computer.

Caps Lock 

Shift Lock

Automatic Caps Lock 

Autocaps via NumLock 

Emulate External Keyboard 

Содержание 1900





































































































































































































































































































































































Отзывы:

Нет отзывов