User Manual
Manx-camera
Company confidential.
This document is the property of Xenics. It may not be reproduced
–
completely or partially
–
or passed to a third
party without written permission from Xenics.
Xenics nv
T +32 16 38 99 00
Doc Ref: ENG-2019-UMN005
Ambachtenlaan 44
F +32 16 38 99 01
Issue: R003
BE-3001 Leuven
Belgium
www.xenics.com
Date: 15/05/2020
XF-104_03/20-12-2012
Page 48 of 73
Example 3
Table 6-3 Continuous acquisition with frame trigger free running and line trigger external with burst count 2
Figure 6-14 Continuous acquisition with frame trigger free running and line trigger external with burst count 2
AcquisitionMode = Continuous;
LineTriggerMode = ExternalTriggered;
FrameTriggerMode = FreeRunning;
LineTriggerInput = Ext1;
AcquisitionBurstFrameCount = 1;
AcquisitionBurstLineCount = 2;
Height = n
AcquisitionStart();
Frame 1
AcquisitionStop();
…
Ext1 trigger 1
Ext1 trigger n
Ext1 trigger 2
Acquisition is stopped,
current frame will be
finished.
L 1
L 3
L 1
– L n
Frame N
…
L n-1
L 2
L 4
L n
Ext1 trigger n/2
Trigger mode
Acquisition
Continuous
Line trigger
External trigger 1
Frame trigger
Free running
Acquisition burst line count
2
Acquisition burst frame count
1
Acquisition start command is given.
Camera is ready to capture a frame.
Camera waits for line trigger.
Camera captures 2 lines per line trigger.
Camera capture N lines and output it as a frame.
Camera waits for next line trigger.
….
Acquisition stop command is given.
No more lines and frames are captured.
