1
2
ENGLISH
Parts of XX series alarmed disc-lock
ENGLISH
XENA
XX series disc-lock alarm
Thank you for choosing a XENA Security product. By purchasing the world’s
strongest, smartest portable lock (with alarm inside), you’ve made life very difficult
for a would-be thief. Please read these instructions carefully. If you have any
questions or comments, don’t hesitate to email us at [email protected].
For more information about this and other XENA products, accessories and
product news, visit www.xenasecurity.com.
The locking system
• Insert the key in the lock and rotate clockwise. The lock barrel will spring open.
• Slide the unit on to your motorcycle’s front or rear brake disc.
• Locate a hole in the brake disc that will allow the locking pin to pass through.
• Push the lock barrel down to insert the locking pin.
• For double-locking locks (XX10, XX14) turn the key counter-clockwise to lock;
for push-down locks (XX6), simply push until the barrel clicks in place.
For more information on fitting XENA locks to your bike,
go to www.xenasecurity.com/faqs.
1. Requires brake-disc thickness less than 7mm (1/4”)
2. Locking-pin size:
XX6
-6mm (1/4”)
XX10
-10mm (3/8”)
XX14
-14mm (1/2”)
3. Distance from locking-pin to back of disc-slot*:
XX6
-37mm (1 1/2”)
XX10
-46mm (1 7/8”)
XX14
-44mm (1 3/4”)
*Note that the locking pin can pass through ANY hole on the brake disc
(see dark areas on diagram).
Fitting
XENA
to your motorcycle’s brake disc
Area for
locking pin
1. Lock barrel
2. Locking pin
3. Battery cover
4. Battery
5. Alarm module
6. Reflector
7. Spring-loaded module catch
8. Lid
9. Flat coded key
1.
2.
4.
3.
5.
6.
7.
8.
9.
