Xeda International CEDAX ELECTROFOG EWV8, Инструкция по эксплуатации

Страница: 53 / 84

EWV
- 51 -
MAINTENANCE ELECTROFOG
7. MAINTENANCE AND REPAIR
7.1 GENERAL WARNINGS
- Operator interventions aimed at cleaning the machine
and adjusting have been limited to the minimum
necessary.
- All maintenance operations that require specific
technical expertise or special skills must be carried
out exclusively by specialised personnel, with
recognised experience that has been acquired in the
specific field of intervention.
- The maintenance and adjustment operations for
which the operator is responsible must be carried out
in accordance with the procedures indicated in the
user manual to ensure adequate safety conditions.
- Before carrying out any maintenance and adjustment
work, activate all the safety devices provided and
assess the need to display warning signs in the
surrounding areas.
- In the phases where operators are expected to
enter the hazardous areas, activate the procedures
provided to ensure adequate safety conditions.
- Replace worn parts with original spare parts. Use
tools and equipment that are not worn and use the
oils and greases recommended by the Manufacturer
to ensure the machine is working correctly and the
level of safety envisaged.
- Do not dispose of pollutants in the environment. Carry
out disposal in compliance with applicable laws.
7.2 NATURE AND FREQUENCY OF
CHECKS AND MAINTENANCE
OPERATIONS
Efficient maintenance and thorough cleaning are
essential conditions to ensure correct operation and
optimal performance of the machine.
For this reason, do everything possible to ensure that all
maintenance is always carried out on the machine (as
described in the following sections) and that it is clean,
in particular inside the fogging pipe.
DANGER
The operator can perform maintenance on the
machine only with the main switch on the control
panel on “OFF”, the power plug disconnected
from the mains socket and after checking that all
parts of the machine are cold. Appropriate PPE
must also be worn.