
18
RC Mini Racebike
EN
The remote control system
·
Charging the battery
The remote control system
Here you get an overview of the remote control system of your RC Mini Racebike and its various features
and settings. Before the first flight, you should have read and understood all these functions and settings.
• Make sure that the transmitter is turned off - ON / OFF
switch in position OFF.
• Now open the battery compartment cover on the bot-
tom of the transmitter with a Phillips screwdriver and in-
sert two AA batteries (or rechargeable batteries) into the
battery compartment of the transmitter. Pay attention to
the correct polarity!
• Close the battery compartment cover and turn on trans-
mitter – push ON / OFF switch in position ON - the red
transmitter POWER-LED starts flashing.
• After switching on the model, the red LED must lit.
•
WARNING:
If the LED still flashes or goes out, the model may not be started, because there is no
binding to the model or the transmitter batteries are empty –
crash hazard!
Change transmitter batteries
immediately.
• Pay attention to the LED also during operation. If the LED flashes, stop driving as soon as possible and
replace transmitter batteries (or recharge the batteries).
Charging the battery:
Before the first use of your new model the drive battery needs to be charged with the included USB-charger.
WARNING:
Charge may occur only with the supplied charger on a fireproof surface and under cons-
tant adult supervision -
fire or explosion hazard!
For charging remove the battery from the vehicle.
WARNING:
Make sure to read all safety instructions regarding the use of rechargeable batteries. Also,
if necessary, further safety instructions in the manual for your used charger.
• Insert the USB connector of the charger in a suitable USB socket, for example your PC.
• Now connect the white connector of drive battery to the jack of the Micro-Charger.
WARNING:
the
connector is polarized, note the side bump. The connector must engage with slight pressure, you not use
any force -
fire hazard!
• If the battery is connected with the Micro-Charger, the LED starts lighting, which indicates that the battery
is charged. The charging time is approx. 30 mins.
Содержание RC Mini-Racebike RTR 2,4 GHz red
Страница 13: ...13 RC Mini Racebike DE ...
Страница 35: ...35 RC Mini Racebike ...