1
Safety Instructions & Regulations
1.Area of application
The XCRiPad2/3/4 is an Intrinsically Safe (ic) Ruggedized iPad (generation 2 or 3
or 4) solution that is designed for industrial use in potentially explosive areas
classified as C1D2 / Zone2 in accordance with directive 94/9/EC.
2. Safety precautions
These safety instructions contain information and safety regulations that must be
observed to ensure safe operation under the described conditions. Failure to follow
these instructions and this information can have serious consequences or constitute
a violation of the applicable regulations.
Please read through these safety instructions carefully before starting to use the
device! In the event of conflicting information, the safety instructions shall take
precedence. In the event of any doubt, please contact Xciel.
3. Faults and damage
If there are grounds for you to believe that the safety of the device has been
impaired, stop using it and remove it from the hazardous area immediately.
Measures should be taken to prevent the device from being used again
accidentally.
The safety of the device may be impaired under the following
circumstances:
- The housing is visibly damaged.
- The device has been exposed to excessive loads.
- The warranty seal is damaged or has been removed.
- The device has not been stored properly.
- The device has been damaged in transit.
- The marking or labeling on the device is illegible or non-existent.
- Malfunctions occur.
