– 10 –
Features subject to change without notice
V1
Central Office Line Name
Central office lines in the suite 64 can be program to display a name rather than “Line 1”, which is
especially helpful with tenants operations. Ringing lines with caller ID will show the caller ID on
the top line and the CO line name on the bottom.
Central Office Line Types
Each CO line in the system is assigned a line type, which will cause it to act differently. By default
all CO lines are marked as CO type. If the system is placed behind a PBX, for example, the lines
should be programmed as a PBX type. Central office lines which are equipped in the system, but
not connected to telephone line facilities, should be programmed as open or empty.
Conference (4-Party)
The system can accommodate up to 8, 4 member party conferences simultaneously. Conference
combinations may consist of three CO lines (maximum) and any number of extensions to a
maximum of four parties. The initiator of the conference is considered the conference controller,
as well as one of the members. The initiator may exit the conference, leaving the remaining
parties on an unsupervised conference and can rejoin the conference simply by dialing a code.
Conference Release (Forced)
The initiator of a conference can release a Central office an extension out of the current
conference.
Conference Room (Meet Me Conference)
The Suite 64 has 8 conference rooms. To meet in a conference, internal parties just dial the
conference room number, whereas incoming CO lines can be transferred into the conference
room. Up to four internal or external parties can be in one conference room, and up to eight
conference rooms can be active at one time.
Direct CO line Access
CO lines can be accessed by pressing the preprogrammed flexible button, dialing an access
code, or dialing the directory number, depending on the system.
Directory Dial
Directory dial in the system 24 allows users to obtain a directory of station users and have the
system dial the extension shown in the display. Directory dial also enables users to program a
name along with a speed dial bin for use in later locating the speed dial number.
Direct Inward System Access (DISA)
DISA allows users to remotely access system resources such as, CO Lines, system speed dial
bins and intercom dialing. Although DISA the convenient, often it leads to toll fraud, therefore it is
not recommended. The System 24/48 does not require additional cards to accommodate DISA.
