PCS
digital
TM
: Voice Mail Setup
Page 1 of 1
Voice Mail Setup
Step 1
At any Key Telephone station:
[FEAT] + [#] + [ * ]
The display reads
DB PSWD:
Enter password
[000000]
(default password)
Press the
[SHOW]
soft-key
Press the
[NEXT]
soft-key
The display reads
1. STATION
Press the
[SHOW]
soft-key
The display reads
SHOW STA
:
Enter
[16]
Press the
[SHOW]
soft-key
Press the
[NEXT]
soft-key until the display reads
VM
PORT: N
Press the
[CHG]
soft-key
The display reads
VM PORT: Y
Press the
[HOLD]
key
The display reads
SHOW STA:
Enter
[64]
Press the
[SHOW]
soft-key
Press the
[NEXT]
soft-key until the display reads
VM
PORT: N
Press the
[CHG]
soft-key
The display reads
VM PORT: Y
Step 2
Press the
[HOLD]
key twice
The display reads
1. STATIONS
Press the
[NEXT]
soft-key until the display reads
6.
SYS
APPLICAT
.
Press the
[SHOW]
soft-key
The display reads
STA HUNT GROUP
Press the
[SHOW]
soft-key
The display reads
HUNT GROUP:
Enter
[8]
Press the
[SHOW]
soft-key
The display reads
GROUP TYPE: HUNT
NOTE: All terminations are by
RJ-11 connection
Use any digital port to convert to
two analog ports.
We use station 16 for the voice
mail port in this example.
NOTE: 48 equals the total
analog port capacity. Adding 16
to 48 equals 64, thus our second
Voice Mail extension is 64
Station 16 coming from the 66
block plugs into the 2-Port
Analog Adapter INPUT
The OUTPUT 1 from the 2-Port
Analog Adapter plugs into the
Jack 1 of VMS unit.
The OUTPUT 2 from the 2-Port
Analog Adapter plugs into the
Jack 2 of the VMS unit.
