16
Using the Battery Clip Adapter
Follow these steps to recharge a 12 volt
battery using the battery clip adapter:
1.
Turn off any lights, audio equipment, or
other 12 volt accessories that are
connected to your vehicle’s electrical
system. Make sure your vehicle is in the
park position and secured by the
emergency brake.
2.
Position the AC and DC cords to reduce
the risk of damage by a hood, door, or
moving engine part.
3.
Stay clear of fan blades, belts, pulleys,
and other parts that can cause injury to
persons.
4.
Connect the XPower Charger 2 DC
cable to the battery clip adapter.
5.
Check the polarity of the battery posts.
The POSITIVE (POS, P, +) battery post
usually has a larger diameter than the
NEGATIVE (NEG, N, –) post.
WARNING: Explosion hazard
A spark near the battery may cause an
explosion. Follow instructions carefully to
reduce the risk of spark near the battery.