Front Panel
6
XPLORE 120/12 Battery Charger Owner's Guide
Front Panel
Figure 3 Front Panel
B
A
E
C
D
WARNING
ELECTRICAL SHOCK HAZARD
n
Replace the wiring compartment cover before turning on
power to this equipment.
n
Use a torque screwdriver to tighten both the captive nut
panel screws to 5 in-lb (0.56 N-m) torque to ensure a
required tool access to the wiring compartment.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
.
Item
Description
A
Mounting flanges
are used to permanently install the product.
B
Onboard status LED panel
(see
for more information) for monitoring charging status for the
three banks.
C
Wiring compartment cover
protects the DC and AC terminals,
as well as accessory ports.
Remove and replace when installing cables. Also provides access
to the AC and DC fuses in the event of an AC overload and
accidental reverse polarity condition, respectively.
D
Captive nut panel screws
for loosening and securing the wiring
compartment cover.
E
Air vent
for air exchange/circulation.
DANGER
ELECTRICAL SHOCK HAZARD
Disconnect the batteries and AC power before opening the wiring
compartment cover.
Failure to follow these instructions will result in death or serious
injury.
Содержание XPLORE 120A 12V
