Xantrex XPLORE 120/12, Руководство пользователя, Страница: 58 / 68

Maintaining the Charger
46 XPLORE 120/12 Battery Charger Owner's Guide
Maintaining the Charger
DANGER
ELECTRICAL SHOCK HAZARD
Do not disassemble the battery charger. See note below.
Failure to follow these instructions will result in death or serious
injury.
NOTE: The XPLORE 120/12 Battery Charger does not have any
user-serviceable parts. Do not disassemble the XPLORE Charger
except where noted for wiring and cabling. See your warranty for
instructions on obtaining service. Attempting to service the
XPLORE Charger yourself may result in a risk of electrical shock
or fire. Internal capacitors remain charged after all power is
disconnected
The XPLORE Charger contains solid-state electronic components
that require no maintenance. The best care you can give the
charger is to protect it from contact with liquids, spray, or fumes
which may cause corrosion and by keeping the air intake vent
clean and free from any obstructions.
n
Disconnect all AC and DC power and clean the outside of
the case and wiring with a damp cloth.
n
Wear protective gloves, if you suspect it has come in
contact with battery fluid, salt water, gasoline or oil, or other
corrosive material.
n
Do not operate if the charger contains moisture of any kind.
n
Periodically, disconnect all AC and DC sources and check
all DC and AC wiring connections to be sure they have not
loosened or deteriorated.
n
Also check all cable clamps to ensure they are tightly
fastened.
n
Loose battery terminals and lugs exposed to open air
corrode rapidly. The corrosion appears as a white powder or
granular foam on the terminals and any nearby exposed
metal parts. If it contacts your skin, it will cause burns
unless you rinse it off immediately.
n
To clean battery terminals, follow the recommendations and
procedures of the battery manufacturer.