Xantrex Watt Series Programmable DC Power Supply XG 850, Руководство по эксплуатации

Страница: 57 / 286

Standard Operation
M370078-01 3-13
3
To set
the
voltage
set point
( V
SET ):
1. Turn the 9-position mode control to the VOLTS position or press the
rotary Adjust/Enter control if the 9-position mode control is already
at the VOLTS position.
The voltage set point is blinking in the output voltage display. The
output current will be displayed in the output current display.
2. Set the desired voltage value using the rotary Adjust/Enter control.
3. Press the rotary Adjust/Enter control to transition to Fine Adjust
mode.
The set point will blink faster to indicate fine adjust tracking mode.
4. Set the desired voltage value using the rotary Adjust/Enter control.
5. Once the desired value has been set, press the rotary Adjust/Enter
control to commit the setting.
Figure 3-4 Operating Modes
Important: If you can’t get the set point to the desired level, you may need to
change the set points for OVP.