Wiring Requirements
WARNING
ELECTRICAL SHOCK AND FIRE HAZARD
Make sure that wiring is in good condition and that wire is not
undersized. Do not operate the solar charge controller with damaged
or substandard wiring.
Failure to follow these instructions can result in death,
serious injury, or equipment damage
WARNING
ELECTRICAL SHOCK HAZARD
Use a torque screwdriver to tighten the screw terminals on the charge
controller to 10.6 lb-in (1.2 N-m) torque to ensure a proper
connection.
Failure to follow these instructions can result in death,
serious injury, or equipment damage
.
16
975-1012-01-01 Rev B
Oct 2019
Содержание SOLAR CHARGE CONTROLLER 30
Страница 1: ...Owner s Guide 30A PWM Charge Controller 709 3024 01...
Страница 38: ......
Страница 39: ...This page has no content...