manualshive.com logo in svg

Xantrex RS3000, Руководство по установке

Поделиться
Скачать
Xantrex RS3000 Скачать руководство пользователя страница 4

About Xantrex

Xantrex Technology Inc. is a world-leading supplier of advanced power electronics and controls with products from 
50 watt mobile units to one MW utility-scale systems for wind, solar, batteries, fuel cells, microturbines, and backup 
power applications in both grid-connected and stand-alone systems. Xantrex products include inverters, battery 
chargers, programmable power supplies, and variable speed drives that convert, supply, control, clean, and distribute 
electrical power.

Trademarks

RS3000 Sine Wave Inverter/Charger is a trademark of Xantrex International. Xantrex and Xanbus are registered 
trademarks of Xantrex International.

Other trademarks, registered trademarks, and product names are the property of their respective owners and are used 
herein for identification purposes only.

Notice of Copyright

RS3000 Sine Wave Inverter/Charger Installation Guide 

© December 2004 Xantrex International. All rights reserved.

Disclaimer

UNLESS SPECIFICALLY AGREED TO IN WRITING, XANTREX TECHNOLOGY INC. (“XANTREX”)

(a) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY 
TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION.

(b) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSS OR DAMAGE, WHETHER DIRECT, 
INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH 
INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER’S RISK.

Date and Revision

December 2004 Rev B

Part Number

975-0171-01-01

Contact Information

Telephone: 1 800 670 0707 (toll free North America)

1 360 925 5097 (direct)

Fax:

1 800 994 7828 (toll free North America)
1 360 925 5143 (direct)

Email:

[email protected]

Web:

www.xantrex.com

Содержание RS3000



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды