Xantrex PROwatt 3000, Руководство пользователя

Страница: 27 / 82

Overview of Installation Steps
3–3
❐
Lugs and terminals for the DC cables that connect to the battery and
fuse holder(s)
❐
DC fuse(s) and fuse holder(s)
❐
AC cable (2-conductor-plus-ground cable), sized appropriately for
load and application (if you are connecting to an existing AC circuit)
❐
1/2 inch cable clamp (if connecting to an AC circuit)
❐
AC transfer switch (if connecting to an AC circuit that also uses
power from another AC source)
❐
Appropriately sized copper cable for the chassis ground
❐
Battery isolator (if connecting to a multiple-battery system)
❐
Battery selector switch*
❐
Alternator controller*
❐
High-output alternator*
* Consult Appendix B, “Battery Types and Sizes” and Appendix C,
“Alternators and Charging Systems” to determine whether you need these
components.
Overview of Installation Steps
Here’s a summary of the seven main steps:
1. Design the installation: calculate battery capacity and charging
requirements.
2. Choose a location.
3. Connect to an AC circuit (if required).
4. Install the remote On/Off switch.
5. Mount the inverter.
6. Connect the chassis ground.
7. Connect the DC cables.