Low Battery Recovery
NOTICE
RISK OF BATTERY DAMAGE
Turn off (or disconnect) all loads completely before performing a Low Battery Recovery procedure.
Failure to follow these instructions can result in damage to battery.
When SoC is less than 3% and the low voltage shutdown event has occured, charge the
battery immediately through a charging source. Follow the steps below.
1. Turn off (or disconnect) all DC and AC loads completely.
2. Start charging.
NOTE
: If charging does not commence, then it is possible that the battery has been
completely depleted. The battery including the entire power system has to be serviced by a
qualified person such as an authorized technician. Contact your dealer for service.
NOTICE
RISK OF BATTERY DAMAGE
Do not perform the low battery recovery procedure repeatedly. Contact customer service so they can refer
you to an authorized technician for service.
Failure to follow these instructions can result in damage to battery.
12
975-0824-01-01 Rev A
February 2020
