Xantrex 808-0888, Руководство пользователя, Страница: 29 / 38

Xantrex Gateway Software
975-1036-01-01 29
Xantrex Gateway Software
How to... Steps
Upgrade the Xantrex Gateway
software.
c
Also, make sure to install on the
computer the Raspberry Pi Imager
software available at:
https://www.raspberrypi.com/software/
1. Go to https://xantrex.com/library/firmwares/ and look for
available software.
2. Remove the microSD card from the Xantrex Gateway and insert
it into the microSD card reader (included in the Xantrex Gateway
box).
3. Insert the microSD card reader into your computer.
4. On your computer, open the Raspberry Pi Imager and click
Operating System .
5. Scroll down and click Erase option.
6. Click Storage and select the SD card from the list.
7. Click Write and wait for the formatting to finish.
8. Click on Operating System again and select Use custom .
9. Select the new software file provided by Xantrex.
10. Make sure the SD card is selected in Storage and click Write .
11. When the Write command completes, remove the microSD
card reader from the computer and then the microSD card from
the reader.
12. Insert the microSD card into the Xantrex Gateway.