manualshive.com logo in svg

Xantrex 8006-1840-02, Руководство пользователя, Страница: 49 / 62

Поделиться
Скачать
Xantrex 8006-1840-02 Скачать руководство пользователя страница 49

975-0390-01-01

35

Warning Messages

Warning messages in the form of audible alarms and error codes 
that appear on the display panel screen to alert you to an impending 
system change. Warnings do not affect operation.
With the exception of the error codes displayed on the screen, only 
the audible alarm can be turned ON or OFF. Follow the steps in “To 
adjust the alarm setting:” on page 13 to change the alarm settings.

The error codes are listed in Table 7 below. The text in the 

Error 

Code 

column appears on the display screen of the display panel.

Table 7

Error Codes Displayed on the Display Panel Screen

Error Code

Condition

 Mode

Action



Low battery voltage shutdown 
is imminent depending on the 
setting, see “Operating Limits” 
on page 22.

Inverting

•

Check battery status and recharge if necessary.

•

Check for proper DC cable sizing.

•

Check for loose connections and tighten if necessary.



High battery voltage shutdown 
> 15.5 volts DC

Inverting

•

Check for external charging sources, such as an over voltage 
alternator, and disconnect if necessary.



AC output overload shutdown

Inverting

•

Reduce the loads connected to the AC outlet of the unit.

•

Check appliances that have high-surge ratings and disconnect if 
necessary.



Over-temperature shutdown

Inverting

•

Reduce the loads connected to the AC outlet of the unit.

•

Check that the ventilation grille is not blocked.

•

Check for ambient temperature and move the unit to a cooler 
location whenever possible.

Freedom HF InvChg Owners Guide.book  Page 35  Wednesday, September 13, 2017  6:20 PM

Содержание 8006-1840-02































































Отзывы:

Нет отзывов