background image

1

Accessories

INSTALLATION INSTRUCTIONS

BYPASS94

IR BYPASS KIT

The BYPASS94 routes Infrared control signals around RF amplifiers and non-DC passing splitters.

10-19-99

Short Coaxial Jumper Cables

CPL10

Couplers

3.5/3.5mm Mono Mini Plug Cable

IR

RF

RF/IR

CPL10 COUPLER

IR

RF

RF/IR

CPL10 COUPLER

CPL10 COUPLER

I R

RF

RF/IR

IN

OUT

CPL10

3.5/3.5mm Mono

Mini Plug Cable

Coaxial cable

to IR receivers

and TVs

RF Amp

CPL10

Short Coaxial

 Jumper Cable

Short Coaxial

 Jumper Cable

Coaxial cable

from IR controlled

RF sources

CPL10 COUPLER

I R

RF

RF/IR

BYPASS94 Kit Parts

The kit includes the following parts:

2- CPL10 RF/IR Couplers

2- Short coaxial jumper cables, with "F" connectors on each end.

1- Connector cable with 3.5mm mono mini plugs on each end.

INSTALLATION

The following diagram illustrates how to connect the kit parts into a coaxial line to route the IR control signal
around an RF amplifier in an RF system.

IMPORTANT:

  Be sure that the IN and OUT terminals of the RF Amp are connected to the terminals marked

"RF" on the CPL10 Couplers.

Use the same technique to bypass non-DC passing splitters or other RF devices.

Отзывы: