Xane F38 HORNET страница 6 Скачать руководство пользователя

Страница: 6 / 8

-06-

Fig. 5 Assembly the landing gear.

Push the landing gear into the hole of the plastic set.

Then the plane were assembled ﬁnished.

3. Assembly the receiver and battery

3.1 Receiver installation

The receiver has to be installed further aft in the fuselage. Check that the cables are long enough to

allow the plugs and sockets to the connected outside the fuselage. The speed controller can be

secured in the space under the canopy.

Connect the left servo to CH1, right servo to CH2,Speed controller to CH3

CH6
CH5
CH4
CH3
CH2
CH1

LEFT AILERON SERVO

RIGHT AILERON SERVO

SPEED CONTROLLER

F-38 HORNET

Содержание F38 HORNET

Страница 1: ...VERSION 1 ASSEMBLY AND OPERATION INSTRUCTIONS MANUAL H O R N E T Wingspan 800mm 31 5in Length 550mm 21 7in Flying weight 560g 19 8oz ...

Страница 3: ...ou start working on it You need Ÿ Servo 2pcs Ÿ Motor 2830 1200KV and 8 6 propellers Ÿ ESC 30A hobby wing F 38 HORNET 2 Preparation Fig 1 Main wing panel Ÿ Apply adhesive not included to the servo holes and then located the servo into the hole Ÿ Install the control horns with screw ...

Страница 4: ...se or counterclockwise on the linkage Ÿ Carefully spread the clevis and put the clevis pin B in a selected hole in the control horn C Ÿ Connect the push rod with servo arm and control horns Ÿ Verify the control surface tips are mechanically centered A B C First Hole F 38 HORNET ...

Страница 5: ... 05 F 38 HORNET Fig 3 Assembly the tail wing Ÿ Apply adhesive not include to the Vertical ﬁn and then glued with fuselage Fig 4 Assembly the propellers ...