XAG GNSS RTK Fix Station, Руководство по установке, Страница: 12 / 17

XAG AUSTRALIA 12
🧷
IMPORTANT
RTK Module Status Indicator
• Console of the RTK Positioning Module
• Checking Operation Status
• Checking Network Status
• Checking Positioning Status
Button
Status Indicator
The Console of RTK Positioning Module is
composed of three function buttons and three
corresponding indicator lights in different colors
(see right figure).
The functions of the button/indicator lights are
defined as follows:
RED LIGHT ON Normal
RED SLOW FLASH WLAN initializing (about 30 seconds)
RED QUICK FLASH Voltage is low (< 12.5V)
(Immediate charging required; when
the voltage is higher than 13.5V, the
red light will return to Normal and the
alert stops).
Status LED Status
Beep
Warning/Alert
YELLOW SINGLE FLASH
Not connected
YELLOW DOUBLE FLASH Connected
YELLOW LIGHT ON Connected, but no available fixed
station nearby (Automatic switch to
24-hour selfcapturing mode).
Status LED
Status
BLUE LIGHT OFF Not connected
BLUE LIGHT ON
BLUE DOUBLE FLASH
BLUE SINGLE FLASH
BLUE TRIPLE FLASH
Status LED Status
RTK
Single
Float
Fix
• Buzzer Alert
▸
Coordinates Different: The buzzer sends an alert when the difference between the coordinates
manually entered and the actual coordinates is more than 8 meters.
▸
Low Voltage: The buzzer sends an alert when the battery voltage is lower than 12.5V. Immediate
charging required; when the voltage is higher than 13.5V, the red light will return to Normal and the
alert stops