X2E XORAYA ML-Z7, Руководство пользователя

Страница: 172 / 208

U
SER
M
ANUAL
X
ORAYA
Z7 | X
ORAYA
ML-Z7
X
ORAYA
S
UITE
172
5.14.7 Create trigger conditions
You use this control element to configure general signal triggers or triggers
of the VIDEO, DiagCCP, DiagXCP and Event interfaces.
The following trigger types are available:
▪
Value compare Raise trigger if a single condition or combined
conditions are met
▪
Signal list Raise trigger if the datalogger detects one of these
signals on the data buses
Value compare:
1 Apply trigger 7 Parenthesize selection
2 Cancel trigger configuration 8 Clear selection
3 Add condition 9 Signal
4 Remove condition 10 Relation
5 Move selection to right 11 Relation type
6 Move selection to left 12 Operator
The following Relation types (11) are available:
Signal value
Number of occurrences of this signal
Time since the last occurrence of this signal (in ms)