manualshive.com logo in svg

X-GLOO SE Series, Руководство пользователя, Страница: 14 / 18

Поделиться
Скачать
X-GLOO SE Series Скачать руководство пользователя страница 14

14

X GLOO

®

  

•

  Windeckstr. 4  

•

  83250 Marquartstein  

•

  Germany

7. TAKEDOWN

7.1  RELEASE AIR

 •  First remove all optional elements (e.g. walls, 

canopies, tunnel parts) that are attached to the tent.

 •  Open the valves on each tube (see section 3). 

PLEASE NOTE: 

It is recommended to let the tent rest on 

the ground with the tubes stacked on top of each other 
after opening the valves. This way the air can escape 
almost completely without any effort.

 

7.2 FOLD

 •  Turn the tent inside-out so that the seam of the tube 

intersection loop is facing outwards.

 •   Lay the tubes on top of one another with the valves 

facing upwards. The roof should be drawn outwards 
in large folds.

 •  Wait a few minutes for the last of the air to escape, 

and then roll up the tent starting from the tube 
intersection and moving down to the tubes.

7.3   PACK

 •  The tent can now be placed in the supplied transport 

bag. The walls can be packed safely in the 
optionally-available side wall bag.

Содержание SE Series



















Отзывы:

Нет отзывов