background image

1226 R830002-1060  

XDS Pro Users Guide 

  

 

 1/11/2010 

Rev A

 

  

1  INTRODUCTION 

 
Welcome to the future of digital audio for the radio industry. This User‟s Guide is your 
handbook for the X-Digital PRO4 digital audio receiver. This receiver is equipped to 
deliver multiple audio services in high quality digital audio for your radio station. It has 
been designed to make use of all the digital communication features of today, and to be 
upgraded to take advantage of the technologies of tomorrow.  
 

1.1 

Important Information 

 
Throughout this guide, you will find icons designed to help you quickly spot important 
information: 
 

 

 
 

Note!

 

The note icon identifies information for the proper 
operation of your equipment, including helpful hints, 
shortcuts, or important reminders 

 

 

 
 

Caution! 

The caution icon identifies information that requires 
careful attention in order to prevent equipment damage. 

 

 

 
 

Warning! 

The warning icon identifies a procedure or practice that 
could result in personal injury if not performed correctly. 

 

 

1.2 

Hardware Upgradeability 

 
X-Digital Systems, Inc. can upgrade its main control software and audio decoder 
algorithms over-the-air. This ensures that your receiver will always have the most up to 
the minute features and functionality. 

1.3 

Hardware Versatility 

 
The XDS PRO4 can deliver audio received via satellite over any one of its four balanced 
output ports. Additionally, content can be received and stored locally for later use. This 
content can originate from a real time satellite broadcast, from a high speed satellite IP 
distribution channel, or can be retrieved via the Internet over the Ethernet port, if so 
configured.  

Содержание PRO4














































Отзывы: