1226 R830002-1060
XDS Pro Users Guide
1/11/2010
Rev A
6 RECEIVER WEB INTERFACE
The XDS PRO4 receiver includes an on-board web interface that will publish itself on
your local area network once you have followed the steps in Chapter 5. From this web
interface you can view most of the receiver‟s internal settings as well as the contents of
the receiver‟s hard drive. To access this site, simply open a web browser connected to
your network and navigate to
(unless you have manually changed your
LAN address to a different value, in which case use this new value as the address). The
receiver‟s IP address can also be found through the front panel. When the page loads,
you will see a login page.
If you log in as “user” with the password “guest” you may change standard
receiver settings such as received program ID, monitoring settings and volume
settings.
If you log in as user “tech” with password “radio” you will have access to all
technical commands. Only use this account when diagnosing or troubleshooting
the receiver.
Once you have logged in, you will see three buttons on the left labeled:
General
,
Programming
, and
Content
. After logging in, you are viewing the information underneath
the
General
button by default. Each of these buttons offers a different set of options
which are represented as tabs at the top of the screen.
*Note: Features not available on Pro4-SG when operating in MX3 framing mode
6.1
The General Menu
The General menu lists most of the basic receiver attributes and settings. After logging in,
you start in the General menu by default. The tabs listed across the top for the General
menu are:
Status
,
Tuner
,
Setup
, and
Relays
. The Status tab is the tab displayed by default
upon entering the General menu. To navigate to another tab within a menu, simple click
the tab‟s name.
