29
X-Cite
®
exacte
User Guide
035-00283 rev 3
9. External Control
9.1 Graphical User Interface (GUI)
9.1.1 A Graphical User Interface (GUI) for use with the X-Cite
®
exacte
is available
online (Control Panel Software: http://www.excelitas.com/Pages/Product/X-Cite-
exacte.aspx). This interface will:
1. Permit computer control of all functions normally available with the front panel
buttons
2. Identify any alarm condition by changing the colour of the corresponding icon
3. Display and record: real-time intensity data from the X-Cite
®
in terms of %
variance from the set-point, system parameter changes, user-defined events
9.2 Installation:
Note:
This procedure will install both the GUI and the virtual COM port driver.
1. Unzip files and save to a folder on your computer.
2. Double-click the file
setup.exe
within that folder.
3. Follow set-up wizard instructions.
4. Connect the X-Cite
®
exacte
to the USB port of your computer.
5. The new hardware found wizard will appear, select
No
to search windows
update for the software. Click Next to continue.
6. Select
Install from a list or specific location (Advanced)
to locate the
driver and click Next.
7. Check off
Include this location in the search:
and browse to the location on
your hard drive where you unzipped the files to in step 1. Click Next.
8. The X-Cite
®
exacte
has a virtual COM port for support of the X-Cite
®
120PC
communication protocol. Another piece of hardware will be detected, follow
steps 5-7 again.
9. When set-up is complete, the X-Cite
®
exacte
icon will automatically appear
on computer desktop.
Содержание Exacte
Страница 1: ...X Cite exacte User Guide...
