WYTRON CD-398 Скачать руководство пользователя

Страница: 5 / 58

1. Introduction

Thank you for choosing

MagicDVD

series CD/DVD duplication

controller card. Hopefully this equipment will bring you
satisfactory and great pleasure in CD/DVD duplication.

Features:

Stand-alone design, no PC or software required.

Easy operation, no training required.

Load, Copy, Compare, Verify, Emulate, Editing, etc.

Compatible formats depend on the writers installed.

On-the-fly direct copy or through hard drive loading.

Track selection available for copying music tracks.

Compatible with many brands of CD/DVD writers
such as Pioneer, NEC, Lite-On, Asus, Sony, etc.

IMPORTANT NOTE:

Make sure voltage setting (AC115/230V) is correct.

Stable input of power is required for normal
operation.

Duplicator should be placed in a clean & cool
working environment.

Check, clean the master and CD/DVD discs before
duplication starts.

Do not touch recording surface of the discs.

Do not move the duplicator during operation.

DO NOT remove the serial number labels
attached on controller card. Warranty will be
VOID if any label is torn off or damaged. Wytron
reserves the right to fix those cards without
labels.

Содержание CD-398



























































Результаты поиска

Содержание CD-398

Отзывы:

Похожие инструкции для CD-398

Бренды по названию

Популярные бренды

WYTRON CD-398, Руководство по эксплуатации

Результаты поиска

Содержание CD-398

Отзывы:

Похожие инструкции для CD-398

Бренды по названию

Популярные бренды