WYTRON CD-398, Руководство по эксплуатации

Страница: 32 / 58

32
error message. If the setting is “Yes”, there will be no
message shown even there is an error in reading. You can
use this function to copy some discs with errors.
Press MODE switch to change and GO to exit.
6.1.13 MODE 2 Compare
This setting can be activated to compare some data format
stored in “MODE 2” disc. Default setting is “No”.
Press MODE switch to change and GO to exit.
6.1.14 Power On Wait
The setting controls the detecting time (in second) for
devices that connected to the duplicating controller card.
Default is 15.
Press MODE switch to change and GO to exit.
6.1.15 Show version
The model number and BIOS version, built date of BIOS will
be shown on the display directly when switching to this
position.
6.1.16 Go load trays
Normally when loading the disc onto each drive, customer
has to push the “eject” button to insert the tray or push
slightly the tray into the drive. To save labor, with “Yes”