Wyse Winterm 3200LE, Руководство администратора

Страница: 147 / 352

16
Dial-Up Scripts
Dial-up RAS (Remote Access Services) scripts are enabled from the Dial-Up
Connection Wizard (see “Dial-Up Connections”). RAS facilitates PPP
communications between the terminal (based on Windows CE) and other
non-Windows operating systems.
Using the Dial-Up Scripts Dialog Boxes
Dial-up scripts dialog boxes are accessed by checking the Enable RAS script box
and pressing the Script command button in the second panel of the Dial-Up
Connection Wizard. These dialog boxes automate actions that otherwise would
be performed in text mode after dialing.
The Script Name dialog box (Figure 16-1) enables you to create a script under a
new name, edit an existing script, or delete an existing script. Press the New button
to open the New Script Name dialog box (Figure 16-2). Type the script name and
press OK. This opens the RAS Script dialog box. You may also open the RAS
Script dialog box to edit an existing script by selecting the script and pressing Edit.
Table 16-1 describes the RAS Script dialog box. To delete as script, select it and
press Delete.