© Copyright 2018 WyreStorm Technologies |
WyreStorm.com
Presentation Switcher API | 180618-1621
9 of 18
North America: 844.280.WYRE (9973) | UK/EMEA: +44 (0) 1793 343
Email:
5.
Commands Strings
While the commands below will control an NHD-SW-0501 they do not provide the selection of the switcher for NetworkHD decoders.
Refer to the
for commands to select the NHD-SW-0501 as a source on a decoder.
Source Switching Commands
Source Selection (Source Connections)
Syntax:
gbconfig --source-select [Source]
Description:
Switches one input to all outputs.
Accepted Values:
SW-0501-HDBT/NHD-SW-0501:
HDMI1 | HDMI2 | HDMI3 | HDMI4 | VGA1 | NULL
SW-1001-HDBT:
HDMI1 | HDMI2 | HDMI3 | HDMI4 | HDMI5 | HDMI6 | DP | VGA1 | VGA2 | HDBT
Example Command:
gbconfig --source-select HDMI3
Response:
none
ScreenLink Start Page
Note: ScreenLink is not available on the SW-1001-HDBT and was added to the SW-0501-HDBT. Ensure that the latest version of
firmware is installed before using this command. Refer to the
ScreenLink Installation App Note
for details.
Syntax:
gbset vi NULL
Description:
Switches to the ScreenLink start page.
Accepted Values:
n/a
Example Command:
gbset vi NULL
Response:
none
Query Current Source
Syntax:
gbconfig --show --source-select
Description:
Obtains the current input selected.
Returned Values:
SW-0501-HDBT/NHD-SW-0501:
HDMI1 | HDMI2 | HDMI3 | HDMI4 | VGA1 | NULL | ScreenLink
SW-1001-HDBT:
HDMI1 | HDMI2 | HDMI3 | HDMI4 | HDMI5 | HDMI6 | DP | VGA1 | VGA2 | HDBT
Note: Each value will be followed by a Y (Active) or N (inactive)
Example Command:
gbconfig --show --source-select
Response:
Currently selected source
Example: HDMI3 Y
