WC-2020-WC
INSTALLATION GUIDE
X
Diameter 5/16 in.
Depth 1-1/2 in.
Drill holes
(top and bottom)
Draw horizontal line
(1)
(2)
Electric drill
Drill bit
Tape measure
Pencil
Screwdriver
Hammer
Stud Bolt
4-pieces
Screws
4-pieces
Washer
4-pieces
Screw cover
4-pieces
Measure positions on wall to reflect
predrilled holes located inside of
cabinet (top and bottom)
After holes are drilled, hammer in
the stud bolts into the holes. Then
line up cabinet to match the predrilled
holes on back of cabinet.
Put screws into the washer through
the cabinet holes and tighten with
screwdriver till cabinet is secure to
the wall.
