32
Problem
Cause
Solution
Breakaway
not in line with
inner and outer
wings
(1) Breakaway air shock needs
adjustment
(1) Loosen U-bolts and move mount out to fold
in, move mount in to fold out
Breakaway
section swings
excessively
(1) Breakaway air shock pressure is too
low
(2) Air shock mount plate misadjusted
(1) Charge air shock to 45 PSI
(2) Bolt mount plate in position
With one wing
folded, boom is
unlevel
(1) Unfolded wing not tilted
(1) Tilt unfolded wing “up” until level
Hi-Lift linkage
will not lower
(1) Transport locks in place
(1) Raise boom off transport locks; remove locks
and store on frame
Boom bounces
excessively
(1) Excessive speed for ground
conditions
(1) Slow ground speed
Boom leans
toward front or
rear
(1) Spray trailer is not level
(2) 3 Point hitch not level
(1) Lower jack to support tongue, raise or
lower hitch in tongue
(2) Shorten top link to straighten toward front;
lengthen top link to straighten toward rear
Troubleshooting
