23
The VersaTrakr and VersaTrail are equipped with a rotary
tank cleaning nozzle that cleans the spray tank when the
chemical type is changed. Open the Fresh Water Tank valve
and the Tank Clean valve. Engage the pump for about one
minute to clean the tank. The diluted rinse fluid should be
sprayed on the field or disposed of properly.
Lower and lock into place any parking stands supplied with
trailer units when unhooked from the tractor to maintain
complete stability.
Preparing The Sprayer For Storage
(1)
Flush the tank, pump and lines with clean water.
(2)
Remove cap from the main tank fill valve and open
ball valve to drain the spray tank.
(3)
Remove cap from fresh water tank valve and open
ball valve to drain the fresh water tank.
Main Tank >
Main Tank >
Valve Closed
Valve Closed
< Fresh Water
< Fresh Water
Valve Open
Valve Open
Agitator >
Agitator >
Valve
Closed
Valve
Closed
Figure C31
3 Point Valve Setting For Fresh Water Flush
Figure C32
Valve Set for Rinsing Spray Tank (VersaTrakr/VersaTrail)
Open Fresh Water Tank Valve >
Open Fresh Water Tank Valve >
Open >
Open >
Spray Tank
Spray Tank
Rinse Valve
Rinse Valve
(4)
Remove the strainer base and screen to drain the
suction plumbing. Remove pump plug to drain pump
housing.
(5)
Remove tips and strainers from the nozzle bodies.
Clean strainers and check tips for wear and damage.
(6)
Open controller ball valves. Allow the system to
drain completely to prevent any parts from breaking due to
freezing. Loosen at least one cap from each boom section
to allow any water inside the nozzle bodies to drain. Check
any fittings where water can collect and disconnect to allow
drainage. Reconnect all fittings and ensure tightness once
system is drained.
(7)
For further protection, pump environmentally safe
antifreeze or winter grade windshield washing fluid into
the lines.
Figure C33
Remove Strainer Base To Drain Tank
Sprayer Operation
