12
Insert hydraulic hoses into the tractor remotes. Take
care to keep the hose pairs together. The articulating
hydraulic system is a closed system that was charged and
calibrated at the factory. Only factory trained technicians
should make any adjustments to the articulating hydraulic
system.
All Spray Trailers:
The
Row Wyng Sprayer requires only two tractor remote
circuits. One circuit powers the pump and while the other
circuit powers all the boom functions. Plug the hydraulic
line pairs into the tractor remotes, connect the sprayer
control cable and connect the toggle box/joystick cable.
Inspection & Setup
Some tractor’s 3 point hitches rise when subjected to
negative tongue weight. This can occur when the main
tank is almost empty, the boom is unfolded, and the tractor
is accelerated rapidly. If your tractor has this tendency,
contact Wylie Manufacturing to obtain a turnbuckle that
locks the 3 point in a set position.
Attach the tractor’s quick hitch to the sprayer’s lower
hitches. Adjust the lower hitches to remove all slack
between the quick-hitch and the lower hitches.
Figure A7
Install Shim With Tractor’s Sway Block
Install Shim Here
Install Shim Here
Figure A8
VersaTrakr/WyngTrakr Mounted to Lower Hitch
Figure A9
Hydraulic Hoses
< Electrical
< Electrical
Connection
Connection
< Pump Hyd.
< Pump Hyd.
Hoses
Hoses
< Lift/Tilt/Fold
< Lift/Tilt/Fold
Hyd. Hoses
Hyd. Hoses
Lift/Tilt/Fold >
Lift/Tilt/Fold >
Control Cable
Control Cable
Spray >
Spray >
Control Cable
Control Cable
