WWBeds Face Unassembled Alpha Murphy, Руководство по сборке, Страница: 9 / 18

Attach Bed Cabinet Securely to Wall
Video: ​ Attaching to wall
4-1: Find Studs
Prior to placing cabinet against the wall, locate 3 studs (you may only find 2 on a twin size) or other wall frame
members at the level of the Top Panel (top of bed). Alert: The cabinet must be secured to studs or other wall
structural members or injury and damage could occur. If the wall is not a wood stud wall, use metal stud
screws, toggle bolts or concrete expansion bolts if necessary.
Tip: for help finding studs there are several websites of video available online, just do a google search. One
example: https://www.lowes.com/n/how-to/how-to-find-studs-in-walls
4-2: Attach to wall
Now that the cabinet is square and
plumb,
​ pre-drill a hole in that
backboard of the Top
Panel/header at the stud
location using a 3/16” drill bit.
Fasten to wall using 3” screws.
Repeat this for two other stud
locations.
If the wall is
​ CONCRETE,
MORTAR OR BRICK
Construction, use masonry
screws:
Drill three pilot holes through the
rear rail of the bed header into the
wall for a twin or full and four for a
queen size bed. Using a 5/32”
concrete drill bit, drill through the
pilot holes into the wall 2” deep.
Anchor the bed by screwing 3/16 x
2 ¼” masonry screw through the
rear rail of the bed header into the
wall.