MDC901-EVBHB Rev2021Jan5
MinDCet NV
Attention: Please refer to Evaluation Kit Important Notice on page 20
Page 21
health it must be ensured by most advanced technological aid of suitable design of the customer application that no
injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.
3. Best Care and Attention
Any product-specific notes, warnings and cautions must be strictly observed.
4. Customer Support for Product Specifications
Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions
in order to serve specific technical requirements. Necessary information is available on request. In this case the field
sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.
5. Product R&D
Due to constant product improvement product specifications may change from time to time. As a standard reporting
procedure of the Product Change Notification (PCN) according to the JEDEC-Standard we inform about minor and major
changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge
should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected.
6. Product Life Cycle
Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery
of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-
Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot
guarantee that all products within our product range will always be available. Therefore it needs to be verified with the
field sales engineer or the internal sales person in charge about the current product availability expectancy before or
when the product for application design-in disposal is considered. The approach named above does not apply in the
case of individual agreements deviating from the foregoing for customer-specific products.
7. Property Rights
All the rights for contractual products produced by MinDCet NV on the basis of ideas, development contracts as well as
models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain
with MinDCet NV. MinDCet NV does not warrant or represent that any license, either expressed or implied, is granted
under any patent right, copyright, mask work right, or other intellectual property right relating to any combination,
application, or process in which MinDCet NV components or services are used.
8. General Terms and Conditions
Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and
Conditions of MinDCet NV”, last version available at www.mindcet.com.
Contact Information
For product questions and technical assistance, please contact
MinDCet NV
Researchpark Haasrode 1716
Romeinse Straat 10
3001 Leuven
Belgium
Phone:
+32 16 40 95 28
Email:
Tech support:
Web:
