WIRELESS CONNECTIVITY & SENSORS
User manual Setebos-I
11.4 Safety recommendations
It is your duty to ensure that the product is allowed to be used in the destination country and
within the required environment. Usage of the product can be dangerous and must be tested
and verified by the end user. Be especially careful of:
• Use in areas with risk of explosion (for example oil refineries, gas stations).
• Use in areas such as airports, aircraft, hospitals, etc., where the product may interfere
with other electronic components.
It is the customer’s responsibility to ensure compliance with all applicable legal, regulatory and
safety-related requirements as well as applicable environmental regulations. Disassembling
the product is not allowed. Evidence of tampering will void the warranty.
• Compliance with the instructions in the product manual is recommended for correct prod-
uct set-up.
• The product must be provided with a consolidated voltage source. The wiring must meet
all applicable fire and security prevention standards.
• Handle with care. Avoid touching the pins as there could be ESD damage.
Be careful when working with any external components. When in doubt consult the technical
documentation and relevant standards. Always use an antenna with the proper characteristics.
Würth Elektronik eiSos radio modules with high output power of up to 500 mW,
as for example the radio module Thebe-II, generate a high amount of warmth
while transmitting. The manufacturer of the end device must take care of po-
tentially necessary actions for his application.
Order code 2611011024020
41
Version 1.1 , July 2022
