WIRELESS CONNECTIVITY & SENSORS
User manual Setebos-I
1 Introduction
The Setebos-I is a radio module for wireless communication between devices such as control
systems, remote controls, sensor nodes etc. Operating in the globally available 2.4 GHz license
free band, it combines two radio standards in a single hardware platform. The Setebos-I can
be configured to work with either Bluetooth
®
LE, or with WE-ProWare radio stack.
• When selecting the Bluetooth
®
LE standard, the Setebos-I acts as a Proteus-III radio
module.
• When selecting the WE-ProWare radio stack, the Setebos-I acts as a Thyone-I radio
module.
Depending on the selected standard, the corresponding module’s specifications apply. These
are available in the dedicated Proteus-III [1] and Thyone-I [2] user manuals.
Small dimensions (8 x 12 mm) comparable to a nano-sim card including an on-board PCB
antenna make Setebos-I ideal for small form factor design. The Setebos-I interfaces the host
system via serial UART.
Figure 1: Setebos-I
Order code 2611011024020
8
Version 1.1 , July 2022
