WIRELESS CONNECTIVITY & SENSORS
User manual Thyone-I
Figure 24: Example network
12.2. Example network
In the example network shown above, the goal is to send a packet from device 1 to 5. Without
the repeater devices, this would be impossible. The steps are as follows:
1. Sender 1 sends a packet.
a) Repeater 2 and 3 receive and accept it at the same time.
2. Device 2 and 3 delay the packet.
a) Repeater 3 sends the packet.
i. Sender 1 and 6 do not accept it, since their addresses are wrong (unequal 5).
ii. Repeater 2 does not accept it, since it has been already received before (1.2).
b) Repeater 2 sends the packet.
i. Repeaters 3 does not accept it, since it has been already received before (1.3).
ii. Sender 1 does not accept it, since its address is wrong (unequal 5).
Order code 2611011021000
126
Version 2.3 , July 2022
