The LCD display
International L – edition: 17.02.2006
49
15
The LCD display
15.1
Technical data
Up to 49 multi-line messages can be displayed. Each message can consist of a max. of 16 lines. The
maximum length of each line is 40 characters.
The display can show 16 characters per line Longer messages are shown as a moving display, start-
ing on the left-hand side. Text memory capacity is max. 1KB. After each line, there is a three-second
pause to facilitate the understanding of the message.
If the second line is too long, the first rolls out of sight, when the second line has reached the right
edge of the display.
The factory has pre-set standard messages in the language concerned. These texts can be altered
or deleted, if necessary.
If you want to alter or delete a message, call up service program key S once.
15.2
Programming
The display may show the following.
You can enter any desired message by apply-
ing the selection buttons, whose functions are
indicated below:
Button 1
Calls up character font, towards A (backwards)
Button 2
Calls up character font, towards Z (forward)
Button 3
Returns to the previous line of a message, stop on line 1
Button 4
Moves the cursor to the left (within a line)
Button 5
Moves the cursor to the right (within a line)
Button 6
Calls up the next line within a message. When you reach the last line that contains
at least one character, a new line is created. You can only add one line at a time.
Each line must contain at least one character to make the creating of another line
possible. When the last line has no characters, this function stops. You can create
up to 16 new lines per message.
Button 7
Calls up the preceding message (starting at 0). The last message is numbered 49.
Button 8
Calls up the next message. After calling the last one, message 0 appears again.
00:01-15= > <
MACHINE ACCEPTS
cursor field
contents of the first line, message 0