Wurlitzer International L, Руководство по эксплуатации

Страница: 15 / 88

Adjusting Product Columns
International L – edition: 17.02.2006
15
3.1.3 Adjusting the Clearance Height of a Product Column
The clearance height of the product columns has to be adjusted according to the height of packs.
The vending machine is set to a clearance height of 18 mm/0.7 inches to 26 mm/1.0 inches by
default.
Optimum clearance height = height of packs + 2 mm/
0.08 inches.
Two possibilities exist to adjust the clearance height:
! Adjusting the clearance height by displacing the motor, see page 16 .
! Adjusting the clearance height by moving the square, see page 16 .
By combining the two possibilities, it is possible to adjust the clearance height for all common width
of packs. The following pages will help you with this task.
Width of packs[mm] Position of the motor Square for reducing the clearance height
10 mm/0.4 in to
18 mm/0.7 in
motor installed in upper position square for reducing the clearance height
18 mm/0.7 in to
26 mm/1.0 in
motor installed in upper position without square for reducing the clearance
height
26 mm/1.0 in to
32 mm/1.3 in
motor installed in lower position square for reducing the clearance height
32 mm/1.3 in to
40 mm/1.6 in
motor installed in lower position without square for reducing the clearance
height
height
of packs+
min. 2 mm
/0.08 in