MISCOM7212G Series Industrial Ethernet Switch
- 1 -
1. Introduction
1.1. Product introduction
The MISCOM7212G series industrial gigabit Ethernet switch is developed
for the fast industry Ethernet communications .It makes industrial
communication more fluent, more stable, more fast. All the TX ports support
auto-negotiation, 10/100/1000Mbps full duplex and half duplex,
Auto-MDI/MDI-X Functions. This switch can supply several management
styles,include visiting the switch by the hyper terminal(CLI),or manage the
switch by telnet system,the SNMP system is also supplied.This switch can also
supply kinds of network monitor protocol:including LLDP,SNTPv4 and DHCP.It
can supply various high-grade management function,include the
MSTP,IGMP,IGMP Snooping,VLAN,GVRP,QoS,Trunk,Quality of Service,rate
control, mirrot port configuration and so on.
The MISCOM7212G has total 12 gigabit Ethernet ports,include
8x10/100/1000Base-T and 4 gigabit SFP fiber ports.
1.2. Product characteristic
1.2.1. Industrial switch with high performance
Total 12 gigabit Ethernet ports to satisfy different network configure
The SFP port can support both LC fiber module or RJ45 module
8x10/100/1000Base-T support the full duplex and half duplex,MDI/MDI-X
connection
<50ms Ring technology based on self-recovery technology link
redundancy
Support the 4094 VLAN based on IEEE802.1Q
Support EAPS,MSTP,VRRP various redundancy protocol
16K MAC address table supported
Support the QoS improve communication quality
Support the SNMP,PMON,Telnet network management protocol
Support visiting the switch by the hyper terminal(CLI)
Support the hardware ACL filtration based on L2-L7 layers data
Support theIGMP Snooping
Support the monitoring of broadcast storm control
MTBF≥300000 hours
Power failure alarm port failure alarm and ring failure alarm
Online software udate based on FTP/TFTP
1.2.2. Industrial level power design
Support two power arrange(in different order model):