wtw TresCon NOx-N, Руководство по эксплуатации

Страница: 21 / 112

NOx-N Operation
2 - 1 ba43110e05 01/2011
2 Operation
The following sections contain all the operating steps and tasks that are
required in connection with the NOx-N analyzer module. The sequence
corresponds to the menu sequence of the main menu.
After calling up most of the menu items, you can select the presentation
of data or change mode. In order to change a parameter, you must
enter the four-digit identification number (PIN).
Note
How to enter the PIN to change parameters is described in volume 1,
T
ERMINAL
, of this operating manual.
Note
The operating sequences are described explicitly for the Change
mode. If you want to display the parameter, proceed to the operating
step "Selecting the change mode" of the instructions and, instead,
select the "Presentation of data" mode.
Caution
If you select the Presentation of data mode, the measuring module
continues to run in the background.
If you select the
Change mode, after the identification number has been
entered, the measuring module goes into STOP mode as important
operating parameters could be changed.
1 Measuring mode
Select TresCon NO
X
-N: Move the arrow (cursor) to the NOx-N
measured value display with
68
.
2 Call up the Parameters NOx-N menu with
3
. The main
menu appears on the display.
Calling up the
main menu,
Parameters NOx-N