wtw pH/ION 7320, Руководство по эксплуатации, Страница: 32 / 104

pH value pH/ION 7320
32
ba75935e04 12/2017
Continuing with two-
point calibration
5. Thoroughly rinse the electrode with deionized water.
6. Immerse the electrode in the first buffer solution.
7. When measuring without temperature sensor:
Enter the temperature of the buffer with
<  ><  > .
8. Start the measurement with <ENTER> .
The measured value is checked for stability (stability control). The [AR]
status indicator is displayed. A progress bar is displayed and the display
of the measured parameter flashes.
9. Wait for the end of the measurement with stability control or accept the
calibration value with
<ENTER> .
The calibration display for the next buffer appears (voltage display).
10. If necessary, finish the calibration procedure as a single-point calibration
with
<M> .
The calibration record is displayed.
For single-point calibration , the instrument uses the Nernst slope
(-59.2 mV/pH at 25 °C) and determines the zero point of the elec-
trode.
pH 1
-180.0
24.8
°C
AutoCal TEC
12.12.2012
12:12
Buffer
mV
pH
-180.0
24.8
°C
AutoCal TEC
10.011
12.12.2012
12:12
AR
Buffer
mV
11. Thoroughly rinse the electrode with deionized water.
12. Immerse the electrode in the second buffer solution.
13. When measuring without temperature sensor:
Enter the temperature of the buffer with
<  ><  > .